Minelab Go-FIND 22

The Minelab GO-FIND 22 is the first model in the GO-FIND series. A series of detectors that, in addition to the starters and the people who are looking for a backup detector, in our opinion is ideal for a whole new target group. We think of hikers, travellers in aeroplanes, campers, camper owners, GeoCachers, beach recreationists, etc. etc. In a few seconds, the Minelab GO-FIND folds out and back into an extremely compact package that fits in almost any backpack or suitcase. The search qualities are particularly good! The GO-FIND series has none or hardly any of the so-called iron masking that many detectors in this price range suffer from. In short, this unique metal detector of Minelab is highly recommended!

ICON DESCRIPTION

If a metal object is detected, an icon flashes that indicates the material indication of the object.
If the icon is disabled (not visible), these objects will no longer be detected.

CONTROL PANEL

1) ON/OFF SWITCH
2) HEADPHONE INPUT
3) SENSITIVITY increasing the sensitivity makes the detector detect deeper but also increases the risk of false signals.
4) VOLUME
5) SEARCH PROGRAMS for detecting and rejecting metal objects
6) DEPTH INDICATION shallow | "half deep" | deep
7) FOUND IC0ONS (4x)
8) BATTERY CONDITION

SEARCH PROGRAMS

The search programmes allow you to reject certain types of metal, which often means you do not have to dig for iron junk.

DETECTOR SOUNDS

The detector gives a sound when an object is detected.
The higher the signal, the greater the chance of detecting a non-ferrous object!
If headphones are fitted, the sound of the speaker is cancelled.

LOW TONE: Iron objects produce a low tone.
MIDDLE TONE 1 (GO-FIND 44/66 only): Some higher conductivity metal objects produce a "lower mid-tone".
MIDDLE TONE 2 (GO-FIND 66 only): Some higher conductive metal objects produce a "higher mid tone".
HIGH TONE: Silver and copper objects, for example, produce a high tone.