Fisher F75

At first sight, some may think that the Fisher F75 resembles its distant cousin the Teknetics T2, but that is just an illusion. Under the housing hides a true topper, a detector for the demanding advanced seeker.
Once you get used to this machine and you will be more than satisfied!

The renewed F75 has undergone an optimisation process and the following points have been improved:
- Better shielding allowing sensitivity to be set higher without interference noise;
- Faster recovery speed;
- Better separation;
- Three new audio tones for iron;
- Variable pitch in discrimination mode;
- Serial number shown in display;

The detector is perfectly balanced, partly due to the battery compartment on the back of the armrest. A big advantage of the F75, in contrast to for example the Teknetics T2 and many other cheaper detectors, is that the settings as they are put in, remain in it. Even when the detector is not used for a long time or when the batteries are replaced! The on/off and volume button of the F75 is located on the side of the battery compartment. In front of the handle is a trigger switch with which you can pinpoint and with which the so-called Fastgrab (automatic) ground balance can be set. On the control panel there is a menu button and a "settings" dial with which all settings can be made. Among other things, various pre-programmed settings can be used. The display also has lighting.

Category / target group:
-Adults and professionals.
Application:
- All-round use.
- Large fields.
- Less large search areas.
- Reasonable on salty beaches.
Specifications:
Weight: 1560 grams
Handle: 3-piece Shortest / longest length: 113 - 139cm
Power supply: 4 x 1.5V battery, Alkaline batteries last approximately 40 hours.
Frequency: 13 kHz
Disk: 29 x 18.5cm semi-elliptical.
Guarantee: 5 years
Standard delivered with: cover set for display and battery compartment, batteries, manual.